In a big shift to their manufacturing operations – and a big political win domestically – TSMC has announced that the company will be building a new, high-end fab in Arizona. The facility, set to come online in 2024, will utilize TSMC’s soon-to-be-deployed 5nm process, with the ability to handle 20,000 wafers a month. And with a final price tag on the facility expected to be $12 billion, this would make it one of the most expensive fabs ever built in the United States.

Operating over a dozen fabs across the globe, TSMC is responsible for a significant share of global logic chip production, particularly with leading-edge and near-leading-edge processes. The company has become perhaps the biggest winner amidst the gradual winnowing of fabs over the past two decades, as manufacturer after manufacturer has dropped out, consolidating orders among the remaining fabs. And with GlobalFoundries dropping out of the race for cutting-edge manufacturing nodes, TSMC is one of only three companies globally that's developing leading-edge process nodes – and one of the only two that’s a pure-play foundry.

This success has become both a boon and a liability for TSMC. Along with Korean rival Samsung, the two companies have seen massive growth in revenues and profits as they have become the last fabs standing. As a result, TSMC serves customers both locally and globally, particularly the United States and China, the two of which are not enjoying the best of relations right now. This leaves TSMC trapped in the middle of matters – both figuratively and literally – as China needs TSMC to produce leading-edge chips, and the United States is now increasingly reliant on TSMC as well following GlobalFoundries’ retreat.

As a result, the Taiwan Semiconductor Manufacturing Company is going to do something it’s never done before, building a near-leading-edge fab in the US, outside of its home base of Taiwan. The new facility, set to be constructed in Arizona, will use the company’s 5nm process, which is currently TSMC’s most advanced manufacturing process. And while this will no longer be the case by the time it comes online in 2024, when 3nm processes are likely to be available, it would still make the Arizona facility among the most advanced fabs in the world, and by far the most advanced contract fab in the United States.

The Arizona facility would be joining TSMC’s other US fab, which is located in Camas, Washington. It, like TSMC’s other non-Taiwanese-fabs, is based around older technologies, with the Camas fab in particular focusing on building flash products using relatively large process nodes (350nm to 160nm). As a result, the Arizona fab represents a significant shift for TSMC; it’s not the first US fab for the company, but it’s the first time TSMC has built such an advanced fab in another nation.

All told, the Arizona fab is set to be a medium-sized facility – a “megafab” in TSMC parlance – despite its use of an advanced manufacturing node. The 20,000 wafers per month throughput of the fab is well below TSMC’s largest “gigafabs” in Taiwan, which can move more than 100,000 wafers per month. As a result while the fab will add to TSMC’s 5nm capacity, it won’t become a massive part of that capacity. Though with an expected price tag of $12 billion, it will still be a very expensive facility to build.

According to TSMC, the primary impetus for building the fab – and especially to build it in the United States instead of Taiwan – is specifically to have high-end production capacity within the United States. With GlobalFoundries dropping out of the race for leading-edge nodes, the US government and other sensitive fabless chip designers are in want of another leading-edge facility within the US to build their chips. Given their location, TSMC’s Taiwanese fabs are seen as security risk, and the US would prefer to be self-reliant rather than relying on a foreign partner – a concern that’s been magnified by the current coronavirus pandemic and the supply chain issues that has created.

The end result is that while the fab is not explicitly reserved for military and other sensitive chips, it’s hard to imagine a scenario where the big commodity chip manufacturers such as AMD and Qualcomm don’t continue to use TSMC’s larger and more efficient fabs in Taiwan. In other words, while the Zen processor you’re playing World of Tanks on isn’t likely to come from Arizona, the chip that goes into an actual tank just might. Unaspiringly then, the planned Arizona fab comes with a lot of interest and support from both Arizona and the US Government, for both strategic and business reasons.

Interestingly, while the desire for more domestic fabs within the US has been well known, the US’s two major domestic fabs find themselves on the outside looking in with this deal. Intel has long tried to lure customers to its own contract manufacturing business, including making pitches to the US government, with little luck. Meanwhile GlobalFoundries is currently the US government’s preferred fab for military hardware – inheriting those fabs and the resulting business from IBM – but whom faces the prospect of slowly losing business as government customers switch to newer manufacturing processes. So in some respects it’s a bit surprising to see outsider TSMC land such a deal, though there are sizable political concerns involved as well.

At any rate, TSMC’s Arizona fab is expected to break ground in 2021, with completion scheduled for 2024. At which point it is anticipated to employ over 1600 workers as TSMC becomes the United States’ second leading-edge foundry provider.

Source: TSMC

Comments Locked


View All Comments

  • NICOXIS - Friday, May 15, 2020 - link

    I wonder how much the Huawei ban will affect demand for TSMC
  • eek2121 - Saturday, May 16, 2020 - link

    TSMC has more demand than supply for 7nm, and that demand is very quickly shifting to 5nm so I doubt it will affect things at all.
  • BedfordTim - Monday, May 18, 2020 - link

    I wondered if this announcement was a negotiating ploy in that battle.
  • spaceship9876 - Friday, May 15, 2020 - link

    China is likely to invade Taiwan within the next decade so having a modern fab in america out of the reach of China is a good idea.
  • Operandi - Friday, May 15, 2020 - link

    Yeah, the geopolitics of a move like this is pretty interesting. China definitely wants Taiwan into the fold and I have to think that this move signifies TSMC not wanting any part of that future.
  • FunBunny2 - Friday, May 15, 2020 - link

    "TSMC not wanting any part of that future. "

    Foxconn has 12 factories in nine Chinese cities—more than in any other country. [the wiki]

  • Operandi - Friday, May 15, 2020 - link

    Yeah, cool shit....... Foxconn is not TSMC I guess????
  • FunBunny2 - Friday, May 15, 2020 - link

    Yeah, of course. The point being that Taiwan corps take full advantage of quasi-slave labor on the mainland. The notion that any of them will poke Beijing in the eye with a stick is ludicrous.
  • FunBunny2 - Friday, May 15, 2020 - link

    Also (I forgot): the BoM of some tech makes a difference. Foxconn tends toward 19th century minimally capitalized piece work assembly. TSMC, I'll concede, is likely much, much lighter on labor in their general BoM. OTOH, since the cost of capital is the same the world over (money is fungible), the only way for capitalists to make money is to screw labor, and possibly materiel suppliers, though the latter is harder to pull off.
  • Operandi - Saturday, May 16, 2020 - link

    Comparing Foxconn to TSMC just doesn't make any sense. Foxconn is a manufacture of electronics, thats it. TSMC is one of two companies fabricates the cutting edge technology that the world runs on. China is desperate to be off of the dependence other nations for their technological needs and that necessitates the ability manufacture it yourself.

Log in

Don't have an account? Sign up now