Colorful, not a widely known brand in the States, has released a motherboard for the Z370 platform with an exotic name: the iGame Z370 Vulcan X V20. The board attempts to focus on gamers with a beefy power delivery, a Killer E2500 gigabit ethernet controller, dual M.2 slots, a dual BIOS and LED lighting, as well as integrated power and reset buttons, a one-touch overclock button, and a three digit debug LED for debugging and monitoring. Carried over from their Z270 boards are Fintek F75503 and F75501 chips for low-latency USB gaming peripherals.  

The board itself is black, with most of the connectors and slots also being black. One of the PCIe slots is gray, and the IO shroud and heatsinks give the board silver highlights. The dual VRM heatsinks are connected via heatpipe, sharing the heat load between them as seen on some high-end boards. Just below the socket is a metal heatsink for the top M.2 slot, which also comes with a silver heatsink. The back panel IO and audio sections have a silver shroud covering those parts, as well as incorporating RGB LEDs within them. The chipset heatsink is fairly large, has the Colorful iGame design on it, and is also hiding RGB LEDs underneath. 

The Vulcan X’s four non-reinforced memory slots can hold up to 4 modules supporting up to 64GB of RAM. The supported memory speed on this board is at DDR4-3200, which is lower compared to the boards from the big four manufacturers. For PCIe, the top two slots are powered by the processor in an x16 and x8/x8 configuration, while the bottom slot is an x4 from the chipset. There are also three PCIe x1 slots from the chipset. This 

Maintaining the Z370 standard, the Vulcan X has a total of six SATA ports. While there is no direct mention of RAID on the specifications page, we would be surprised if it did not support the basic RAID 0, 1, 5, and 10. The board comes with two M.2 slots, with the top slot above the main PCIe slot (and below the heatsink) supporting a PCIe module only, up to 80mm module. The bottom slot, found between the two bottom full-length PCIe slots, can also support up to an 80mm module but can do both PCIe and SATA drives.

By visual inspection, there appears to be a total of four 4-pin fan headers on the board. No information if they are PWM only or a hybrid DC/PWM setup. Audio duties are handled by the previous generation’s Realtek ALC1150 codec, although with the shroud in place it is unclear if much extra work has gone into PCB separation or EMI shielding. The Vulcan X is able to drive up to 600Ω headphones with its op-amps and also uses Nichicon audio capacitors. Networking functions are handled by the Rivet Networks Killer E2500 Gigabit controller.

On the back panel IO, the yellow ports are USB2.0 and two red is the low-latency gaming ports, The two light blue color ports are USB 3.1 10 Gbps, while there is a stack of four USB 3.0 ports. Rounding out the back panel IO there is a CMOS reset button, HDMI and DisplayPort outputs for integrated video, and a gold-plated 6-jack audio stack plus a SPDIF out. 

The Colorful iGame Z370 Vulcan X V20 is available now in South Korea, but no mention of when or if it will make it to other markets.

Colorful iGame Z370 Vulcan X V20
Warranty Period 3 Years
Product Page Link
Price N/A
Size ATX
CPU Interface LGA1151
Chipset Intel Z370 Express
Memory Slots (DDR4) Four DDR4
Supporting 64GB
Dual Channel
Support DDR4 3200+
Network Connectivity 1 x Rivet Networks Killer E2500 LAN
Onboard Audio Realtek ALC1150
PCIe Slots for Graphics (from CPU) 2 x PCIe 3.0 x16 slots @ x16 / x8
PCIe Slots for Other (from Chipset) 1 x PCIe 3.0 x16 slots @ x4
3 x PCIe 3.0 x1 slots @ x1
Onboard SATA 6 x
Onboard SATA Express None
Onboard M.2 2 x PCIe 3.0 x4
- Bottom one also SATA
Onboard U.2 None
USB 3.1 2 x Type-A
USB 3.0 6 x Type-A
USB 2.0 7 x Type-A
Power Connectors 1 x 24-pin EATX
1 x 8-pin ATX 12V
Fan Headers 4 x 4-pin
IO Panel 1 x PS/2 keyboard/mouse port
2 x USB 2.0 (Gaming Special - Yellow)
2 x USB 2.0 (Magic Sound - Red)
4 x USB 3.0 (Blue)
1 x Clear CMOS button
1 x Optical S/PDIF out
1 x LAN (RJ45) port
6 x Audio Jacks
1 x HDMI
1 x DisplayPort
2 x USB 3.1 (10 Gbps Light Blue)

Related Reading

Source: Colorful

Comments Locked


View All Comments

  • DanNeely - Tuesday, October 24, 2017 - link

    The IO Panel section looks like it's got a few stray line or two of copy-pasta from a previous use: "1 x USB 3.1 Type-A" is redundant with lines above as well as incorrect "2 x USB 3.1 (10 Gbps Light Blue)".

    "2 x USB 3.0 Type-A" should either be called out as low latency ports (and what exactly does that mean if it's not pure marketing BS?), or combined with the other 4 ports.
  • Joe Shields - Wednesday, October 25, 2017 - link

    Updated! Thank you for the keen eye!
  • Hxx - Tuesday, October 24, 2017 - link

    first in South Korea? Yeah keep this board over there . no need to bring it to the US. we got plenty of gamery RGB boards already
  • Morawka - Tuesday, October 24, 2017 - link

    more competition is always good. It makes OEM's add features to their boards. Globalization is amazing for the consumer.
  • kmi187 - Tuesday, October 24, 2017 - link

    The board looks promising. But why in the hell would you put a Killer NIC on a board with these type of features?
  • ronchse22 - Saturday, August 11, 2018 - link

    That is a really good tip especially to those fresh to the blogosphere. Brief but very precise information… Thank you for sharing this one. A must read article! In fact, I do enjoy the Facebook Messenger and WhatsApp Messenger, but no-one can ever overcome Apple's <a href=''>imessage for windows</a> .

Log in

Don't have an account? Sign up now