Testing Methodology

For testing Micro-ATX and full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.

ATX Test Configuration
CPU Intel Core i7-2700K
(95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V)
Motherboard Gigabyte GA-Z68MX-UD2H-B3
Graphics Card ASUS GeForce GTX 560 Ti DCII TOP
(tested at stock speed and overclocked to 1GHz/overvolted to 1.13V)
Memory 2x2GB Crucial Ballistix Smart Tracer DDR3-1600
Drives Kingston SSDNow V+ 100 64GB SSD
Samsung 5.25" BD-ROM/DVDRW Drive
CPU Cooler Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400
Power Supply SilverStone Strider Plus 750W 80 Plus Silver

Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.

Thank You!

Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.

Assembling the Rosewill Armor EVO Noise and Thermal Testing, Stock
Comments Locked

19 Comments

View All Comments

  • max347 - Wednesday, January 23, 2013 - link

    Second paragraph, second sentence, seen->see*?
  • SunLord - Wednesday, January 23, 2013 - link

    You know what I would like to see in case reviews photos of the case with different size motherboards. I don't care about them testing the case with all the different sizes but it would be nice to see what a Full ATX and an E-ATX would look like installed in the cases that support them using a MicroATX MB is nice for a constant variable in testing across all cases but gives you zero clue on how well a motherboard you would actually use in this case would fit or look
  • Sabresiberian - Wednesday, January 23, 2013 - link

    I agree here. I understand the reson to stick with one size mainboard for all testing, but I'm very skeptical of the clams of some of these case manufacturers when they say their case will hold "XL-ATX" and "E-ATX". Get one of those EVGA SR-2s and slap that baby in there, heh.
  • Sabresiberian - Wednesday, January 23, 2013 - link

    reason*; claims*. Sheesh, my error checker was way on the blink on this post.
  • Barbarossa - Monday, January 28, 2013 - link

    The SR-2 is HPTX, most cases don't claim compatibility with that.

    By E-ATX most people mean a Rampage or Maximus board from Asus or similar, which isn't actually the same as the TRUE E-ATX spec.

    XL-ATX is kind of a made-up spec, but it was used to define longer than standard boards (more than 8 slots).
  • ForeverAlone - Wednesday, January 23, 2013 - link

    It's nice to see that twin-120mm fans on the front are standard now.
  • number58 - Wednesday, January 23, 2013 - link

    I noticed that the numbers from the recently reviewed phantom 630 were not in the tables to compare with this case. Any particular reason?
  • vol7ron - Wednesday, January 23, 2013 - link

    Not sure this would have much of an impact on results, but do you take ambient temperature before/during (maybe even after) tests?
  • pensive69 - Wednesday, January 23, 2013 - link

    how about a marriage between a small home or dorm room fridge maker and a case maker? you'd be able to do your install INSIDE an actual fridge with insulation and temp controls provided in a system designed to work at 35 - 45 F anyway?
    ambient air solutions start around 30 - 40 F higher out of the box
  • Beenthere - Wednesday, January 23, 2013 - link

    Some of the PC case makers seem to have lost the plot...

    There is a reason why the original tower PC cases were built the way they were with no openings in the top of the case. Here's a hint: what blows out can also fall in...

    While in theory an open top allows warm air to escape easily, it also allows dirt/dust/liquids/small objects, etc. to enter - even when unintended or unwanted. Thus top openings in PC cases are a bad idea on several fronts including NOISE, for those who don't already know.

    As far as buying this Rosewill case based on it's "thermal headroom", that is a sick joke. It hardly matters if your OC'd CPU runs at 49C or 51C as either is well within the low end of the operating range for ANY CPU. Hell 59C isn't even an issue.

    With all of the disadvantages to this case design be it the top opening, which being raised is REALLY bad, the noise, the shoddy construction, the excessive fan noise, the screened side panel and the excessive price, this unit can hardly be recommended for anyone with a clue. Yes some folks will buy it for it's "stealthy" look or it's pretty LEDs but not anyone with a clue, especially when you can buy a quality conventional PC casr for ~$70.

    It's actually quite silly what the PC case market has become in recent years to entice the 13 year old kids. I'm surprised they aren't selling PC cases with tit and arse plastered on the outside of them - aka Lara Croft/Anjie Jolie, like they do GPU cards. Those would fly out the door faster than they could produce them. The 13 year old kids could have their favorite fantasy babe half naked sprawling all over the outside of their PC case. Oh baby, I can't wait for these...soon to be on shelves no doubt. :(

Log in

Don't have an account? Sign up now