Phanteks Enthoo Primo Case Review
by Dustin Sklavos on August 10, 2013 12:00 PM EST- Posted in
- Cases/Cooling/PSUs
- Water Cooling
- Phanteks
For testing full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
ATX Test Configuration | |
CPU |
Intel Core i7-2700K (95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V) |
Motherboard | Gigabyte GA-Z77X-UD4H |
Graphics Card |
ASUS GeForce GTX 560 Ti DCII TOP (tested at stock speed and overclocked to 1GHz/overvolted to 1.13V) 2x NVIDIA GeForce GTX 580 in SLI (full fat testing only) |
Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive 3x HGST DeskStar 3TB 7200-RPM HDD |
CPU Cooler | Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400 |
Power Supply | SilverStone Strider Plus 1000W 80 Plus Silver |
Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
For the "full fat" testbed, the GTX 560 Ti is swapped out for a pair of GTX 580s, and three hard disks are added to fill out the case.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i7-2700K.
- Thank you to Gigabyte for providing us with the GA-Z77X-UD4H motherboard.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Cooler Master for providing us with the Hyper 212 Evo heatsink and fan unit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- Thank you to HGST for providing us with the trio of hard drives.
- And thank you to SilverStone for providing us with the power supply.
42 Comments
View All Comments
Alan G - Saturday, August 10, 2013 - link
+1 on the mini-ITX request; I'm starting on my third build with this size board because that's what my friends want. I'm not prepared to spend over $200 for a case like this one as it's truly overkill IMO. Even though the from panel is closed off, what does anyone need with 5 5.25" drive bays? For my photographer friends I don't even put card readers in these days because USB 3.0 readers are cheap and if a pin ever gets bent (and this does happen) they get a new one for $30 and the case doesn't have to be opened and things pulled apart and installed.I think there are just too many good alternatives to this case for less money.
BillyONeal - Saturday, August 10, 2013 - link
There need to be more mini-ITX cases worth reviewing for that :)Grok42 - Sunday, August 11, 2013 - link
The truth hurts. While there are some good mITX cases that haven't been reviewed, they aren't recent cases. I can understand not wanting to review a 2-year old design but I would still appreciate it.zero2dash - Saturday, August 10, 2013 - link
"Full ATX accounts for less than 5% of the tech enthusiast community now."I'd love to see the proof to back up that statement.
You can buy plenty of enthusiast mATX/ATX boards for nearly any price point; meanwhile, if you want an enthusiast ITX board, you're going to pay out the nose for it. You're also left with only a few decent cases that do a good enough job at cooling.
ITX works if you have minimal requirements on storage and are only running a single GPU.
f0d - Sunday, August 11, 2013 - link
where is the proof of "Full ATX accounts for less than 5% of the tech enthusiast community now." i know that personally i have only built 1 mini-itx vs about 15 full atx pc's in the last 3 years for friends/familyand that person is now getting me to build an ivy bridge-e full atx system when they come out
noeldillabough - Sunday, August 11, 2013 - link
Which board do you plan to use? I use a raid controller and a discrete sound card so features on board don't really matter to me but I want a stable board with good overclocking potential.Grok42 - Sunday, August 11, 2013 - link
My last build was mITX and I can't see every building anything larger than mATX going forward. The mITX case I chose holds 10 drives. You would be amazed how much space is saved by not having any 5.25" bays.All that said, I'm too would be surprised that only 5% of the market is full ATX case purely based on the quantity of cases available. I guess if we're at an inflection point where everyone is moving away from full ATX it's possible that only 5% bought full ATX in the past month of YTD?
Barbarossa - Wednesday, August 14, 2013 - link
George from Corsair here. Full towers sell in larger numbers than Mini ITX. Look at all the ~$150+ cases that are selling now: NZXT Phantoms, Cooler Master Storm Troopers/Strykers, etc. Full towers are more popular than ever.Mini ITX is growing in popularity but among the "enthusiast" crowd, full towers have increased dramatically in market share in the last couple of years.
Mid Tower ATX is still 70-80% of the total market, with Mini ITX and Full Tower ATX growing and chipping away at the edges. The bell curve is flattening but it's still there.
f0d - Saturday, August 10, 2013 - link
too much plastic and not enough roomi prefer my 900D - im so happy with that case i cant imagine ever needing another case again
HisDivineOrder - Saturday, August 10, 2013 - link
Then the 950D hits and you suddenly awaken one day with the very real ability to imagine it.Take the Obsidian 900D and then make it a huge cube instead. Ba-bam. You can name your new monolith, "The Borg" and add custom Borg cube sound effects when it starts.
Resistance is futile.