Yeah well I have had OCZ platinum 3200 o'clocked to 3500 (2-2-3-7) for 9months now and noticed it slowly degrading. I used to pass Memtest86 at 220MHz with Game Accelerator (GAT) F1 (Abit IC7-G) but now I have to switch off the GAT at 216MHz to successfully run Memtest86. At F1, DDR Voltage is 2.7V otherwise 2.6V. I notice the mem. modules are quite warm (even hot) so maybe I need extra cooling as the DIMMS are out of the normal air circulation at the top of the case. And its been a hot summer.
It seems crazy that memory modules that are at least 12 months old (BH5/BH6) are still the best performers in the 400 to 433MHz range and even higher (original OCZ3700 gold) given the very fast ascent from 266 to 400 at low latencies. Lets hope these Hynix DDR550 modules cut the mustard.
I cant run F1 higher than CAS2 at present (and Street Racer not at all) although others in posts say they do. So finally Wesley, will the EB technology modules run F1 or Street Racer at 466-500Mhz.
It might have been interesting to set CAS latency on the other modules to 2.5 to see how much this 'EB' helps vs. non-EB ram at identical timings.
This article also simply seems to show (again) that OCZ memory, of any sort, is just plain good. Recall the article on the FX-53, wherein the 2.4Ghz chip with OCZ ram performed more than 200Mhz better than the 2.2Ghz FX-51 with Mushkin RAM... this even though the Mushkin had better timings.
Were I shopping for high performance RAM, my shopping would begin and end with OCZ... it'd just be a matter of choosing which OCZ modules.
We’ve updated our terms. By continuing to use the site and/or by logging into your account, you agree to the Site’s updated Terms of Use and Privacy Policy.
13 Comments
View All Comments
Pumpkinierre - Wednesday, April 7, 2004 - link
Yeah well I have had OCZ platinum 3200 o'clocked to 3500 (2-2-3-7) for 9months now and noticed it slowly degrading. I used to pass Memtest86 at 220MHz with Game Accelerator (GAT) F1 (Abit IC7-G) but now I have to switch off the GAT at 216MHz to successfully run Memtest86. At F1, DDR Voltage is 2.7V otherwise 2.6V. I notice the mem. modules are quite warm (even hot) so maybe I need extra cooling as the DIMMS are out of the normal air circulation at the top of the case. And its been a hot summer.It seems crazy that memory modules that are at least 12 months old (BH5/BH6) are still the best performers in the 400 to 433MHz range and even higher (original OCZ3700 gold) given the very fast ascent from 266 to 400 at low latencies. Lets hope these Hynix DDR550 modules cut the mustard.
I cant run F1 higher than CAS2 at present (and Street Racer not at all) although others in posts say they do. So finally Wesley, will the EB technology modules run F1 or Street Racer at 466-500Mhz.
johnsonx - Wednesday, April 7, 2004 - link
It might have been interesting to set CAS latency on the other modules to 2.5 to see how much this 'EB' helps vs. non-EB ram at identical timings.This article also simply seems to show (again) that OCZ memory, of any sort, is just plain good. Recall the article on the FX-53, wherein the 2.4Ghz chip with OCZ ram performed more than 200Mhz better than the 2.2Ghz FX-51 with Mushkin RAM... this even though the Mushkin had better timings.
Were I shopping for high performance RAM, my shopping would begin and end with OCZ... it'd just be a matter of choosing which OCZ modules.
Cybercat - Wednesday, April 7, 2004 - link
Well....this is new....and impressive.